Electrical Engineering information e.g.

Feed Reader

Electrical Engineering > Journal of Applied Sciences 2006

Journal of Applied Sciences RSS Feed -- 2006

1.) Estimation of Recreational Use Value of Forest Resources by Using Individual Travel Cost and Contingent Valuation Methods (Kayabasi Forest Recreation Site Sample)*

2.) A Reflection Filter of Fiber Grating With Optical High Isolation

3.) Preliminary Assessment of Rare Earth Element Contents of Niger Delta Oils

4.) Genetic Relatedness Among Isolates of Acanthamoeba Based on RAPD Analysis

5.) The Effect of Base Map Scale on the Accuracy of Floodplain Zoning Using GIS

6.) A Distributed Data Management in Knowledge Based Group Decision Support Systems

7.) Prediction of Cutting Force Model by Using Neural Network

8.) Musculoskeletal Symptoms Among Automobile Assembly Line Workers

9.) Determining Rate of Litter Decomposition of Alnus subcordata in Asalem and Vaz Regions by C/N Index under Laboratory Conditions

10.) Determining Demand Priorities of Various Stakeholders Regarding Forest Goods and Services in the Context of Sustainable Forestry: A Case Study from Turkey

11.) Kinetics of Phenol-sorption by Raw Agro-wastes

12.) Land Suitability Modeling of Natural Vegetation Using Integrated Remote Sensing and GIS Techniques: A Case Study

13.) The Implications of WTO Agreement on Production and Consumption of Wheat in Pakistan: A Time Series Analysis

14.) Miniature Parks and the Sample of Miniaturk

15.) Is Emotional Intelligence or Mental Intelligence More Important in Language Learning?

16.) Effect of Temperature and Pressure on the Extraction Yield of Oil from Sunflower Seed with Supercritical Carbon Dioxide

17.) Improvements to Shank`s Baby-step Giant-step Algorithm

18.) The Lyapunov Exponents of the Impact Oscillator

19.) Growth and Characterization of Novel (Ni³⁺, Mg²⁺) Bimetallic Crystals of Ammonium Di Hydrogen Phosphate

20.) Performance of Water User Associations in the Management-operation and Maintenance of Great Menderes Basin Irrigation Schemes

21.) Analyze Images, the Coefficients of Gabor: A Simple Method for Calculation of the Coefficients of Gabor

22.) Interaction Phenomena Arising Between Adjacent Buildings Numerical Investigation and Design Comments

23.) Advantages of International Financial Diversification in Europe Through Investment in Equity Funds

24.) Mathematical Inventory Model under Trade Credits Linked to Payment Time

25.) Crystal Mosaic Spread Determination by Shape Fit Analysis

26.) The Oldest Cervid from the Siwalik Hills of Pakistan

27.) Ruminant Fauna from the Tertiary Hills (Neogene) of the Siwaliks of Pakistan

28.) Extraction Equilibrium of Monocarboxylic Acids in Aqueous Solution by Using Tributyl Phosphate in Dodecane

29.) Comparison of the Recent Precipitation Variation at Three Locations in China

30.) Regression Pattern Application in Quality Control

31.) A Simulation Technique For Engineering Control Systems

32.) The Subsidence of Cenozoic Formations in Nanpu Sag (Bohaiwan Basin)

33.) Seismic Modeling of the Velocity Components at the Sea Floor in Frequency Domain

34.) Plant Communities Analysis of Selected Urban Flora of Islamabad

35.) Effects of Increasing Load Transferred in Femur to the Bone-Implant Interface

36.) Multisolvent Determination of pH of Soils from Bituminous Sands Deposit Areas of Nigeria

37.) Modeling the Pavement Present Serviceability Index of Flexible Highway Pavements Using Data Mining

38.) Simultaneous Determination of Accumulated Hazardous Metals in Hen`s Egg by Atomic Absorption Spectroscopy

39.) Maximum Glass-forming Ability Obtained at an Off-eutectic Composition Within a La-al-(Cu, Ni) Pseudo-ternary Eutectic System

40.) Assessing Zinc Status of Sugarcane in Taluka Nawabshah Through Soil and Plant Analysis

41.) Study of Sharp-cut Decrease of Dead Sea

42.) Integration of Geological Data Sets Using Fussy Logic

43.) Single Laser Light Source Multi-Channel PSK Optical Communication

44.) Effect of Phosphorous Source Material on the Electrodeposition of CoNiP Magnetic Films

45.) Welfare Analysis of Rice Trade Under WTO Regime: A Case Study of Pakistan

46.) Social Forestry in Turkey: Twenty Years in Review

47.) Chi-square Mixture of Chi-square Distributions

48.) Analysis Characteristics and Provide a Prediction Model of Public Bus Accident in Tehran

49.) Fetal ECG Extraction using Softcomputing Technique

50.) Democracy and Economic Growth: Statistical Evidence from Nigeria 1960-2002

51.) Delaying Apricot (cv. Shahroudi) Flower Induction by Growth Regulators Application

52.) W-connectivity Spectrum Method for Analysis of Images by Laser Therapy

53.) Synthesis and Elastic Behaviour of Borate Glass Doped with High Tellurite Content

54.) Effect of Floating Objects on Critical Impulse Breakdown of Air

55.) Technological Study of Auto-Leveller at Draw Frame on Cotton Yarn Quality

56.) Comparison Studies Between Soda Lignin and Soda-anthraquinone Lignin in Terms of Physico-chemical Properties and Structural Features

57.) Slicing Floorplan Using BDD-based Constraint Solver

58.) Residents` Satisfaction on Re-urbanization after Earthquake Disaster in Düzce, Turkey

59.) The Importance of Using Some Glass Systems as Standard in Transmission Spectrophotometry in the Visible and Ultraviolet Regions

60.) Water Pillow: A New Irrigation Method

61.) Use of Secondary Effluent in Food Production in Botswana

62.) A Note on the Deterministic Inventory Models with Shortage and Defective Items Derived Without Derivatives

63.) Basic Information System Directed at Monitoring and Evaluation in Irrigation Projects

64.) Computer-aided Deflection and Slope Analyses of Beams

65.) Calculation of the Optical Constants of Amorphous Semiconducting As₄₀s_60, As₄₀s₃₅se₂₅ and As₄₀se₆₀ Thin Films from Transmittance and Reflectance Measurements

66.) A Survey of Awareness and Behaviour in Regard to Environmental Issues among Seluk University Students in Konya, Turkey

67.) Influence of Season on Semen Characteristics of Sahel Bucks in Borno State

68.) A Regression Analysis of the Economic Factors Effecting the Import of Forest Industry Products in Turkey

69.) Study on the Autocontrol of Stud Plunge Depth in Stepping Arc Stud Welding

70.) Effect of Skew Angle on Distribution of Bending Moments in Bridge Slabs

71.) Determination of Residues of Quinolones in Poultry Products by High Pressure Liquid Chromatography

72.) Effect of Wastewater from Quetta City on the Germination and Seedling Growth of Lettuce (Lactuca sativa L.)

73.) On Polar Moments of Inertia of Lorentzian Circles

74.) Relationship Between Value Added and Electricity Consumption in the Iranian Industries

75.) Neural Network Model for Oil Palm Yield Modeling

76.) A Research on the Usage of Credit Cards in TRNC

77.) A Deterministic Inventory Model under Quantity-depended Payments Delay Policy Using Algebraic Method

78.) Liquid-liquid Equilibrium Data for the Ternary Systems of Propionic Acid-Water-Solvents

79.) Iran Car Industry Policies

80.) Eigenposture for Classification

81.) Remote-control and Supervision of Irrigation Systems: An Attempt to Better Water Management

82.) Determining of the Suitable Burning Method for Wheat Straw and Sunflower Stalks

83.) Spatial Variability of Organic Matter and Some Soil Properties of Mineral Topsoil in Cankiri Indagi Blackpine (Pinus nigra) Plantation Region

84.) Analysis of Repeated Measures by Using Multivariate Method

85.) Review of Methods for Integer Factorization Applied to Cryptography

86.) Implementing Secure RSA Cryptosystems Using Your Own Cryptographic JCE Provider

87.) Water Quality Assessment of River Ogun Around the Cattle Market of Isheri, Nigeria

88.) Torque Prediction Model for Milling 618 Stainless Steel Using Response Surface Methodology

89.) Anti Yeast Activity of Streptomyces olivaceus Strain 115 Against Candida albicans

90.) Effect of Some Selected Processing Routes on the Nutritional Value of Soy Yoghurt

91.) Utilization of Sewage Sludge as Organic Fertiliser in Sustainable Agriculture

92.) In vitro Susceptibility of Alternaria solani to Several Iranian Soil Actinomycetes

93.) Guava Fruit Anthracnose and the Effects on its Nutritional and Market Values in Ibadan, Nigeria

94.) Early Estimation of Hardened Concrete Strength

95.) An Analytical Approach on Cure Rate Estimation Based on Uncensored Data

96.) Some Useful Formulae for Monte Carlo Simulations Relating to Burr Type II, XII Distributions

97.) Alterations with Biotic Origin in Metallic Containers

98.) Distribution of ²³⁴U and ²³⁸U in Sungai Selangor, Peninsular of Malaysia

99.) Removal of Heavy Metal Ions by Blended Periwinkle Shells

100.) Virtual Prototyping in Power Electronics Using VHDL-AMS Application to the Direct Torque Control Optimisation

101.) Transient Stability of Power Systems Using Sliding Mode Controllers

102.) Analysis of Crankshafts Vibrations to Compare the Dynamic Behavior of Steel and Cast Iron Crankshafts

103.) A Framework for Mining Ontological Information Nets

104.) A Mode-I Crack Problem for an Infinite Space in Thermoelasticity

105.) Laboratory Preparation of a New Antifungal Agent from Streptomyces olivaceus in Control of Fusarium oxysporum f.sp. melonis of Cucurbits in Greenhouse

106.) Optimization of a Heavy Continuous Rolling Mill System Via Simulation

107.) Application of GIS for Population Analysis Case Study of Zwarah, Libya

108.) Optimizing Flexible Behaviour of Bow Prototype Using Taguchi Approach

109.) Calculation of the Arrhenius Parameters for the Pyrolysis of Some Alkyl Vinyl Ethers Using Mopac

110.) Crystal Growth of Novel Bimetallic Nikel, Magnesium (Ni³⁺, Mg²⁺) Potassium Di Hydrogen Phosphate by Solution Growth and their Characterizations

111.) Improvement of Fixing Problems in Lin et al.`s OSPA Protocol

112.) Prevalence of Sleep Disorders in Nurses Working on Rotating Shifts

113.) Arabic Words Recognition by Fuzzy Classifier

114.) Genetic Variation of Mahaleb (Prunus mahaleb L.) on Some Iranian Populations Using Morphological Characters

115.) Anti-Streptomyces Activity of Myrthus communis and Terminalia chebula, Medicinal Plants of South East Regions of Iran

116.) A New Approach for Termination Analysis of Active Rules

117.) An Empirical Testing of Capital Asset Pricing Model in Bangladesh

118.) Biochemical Effects of Pesticides on Serum and Urinological System of Rats

119.) Organic Iron-fertilizers from Hornbeam-leaves, Outer Rice-husks and Charcoal

120.) Measurement of Organochlorine Pesticides Level in Milk Agricultural Women Workers (Mazandaran-Iran)

121.) Impact of Stray Illumination Noise on the Position Response of Position-Sensitive Devices

122.) Modeling and Simulation of BLDCM Using MATLAB/SIMULINK

123.) Decantamination of Textile Wastewater by Powdered Activated Carbon

124.) E-Commerce: A Study on Internet Shopping in Malaysia

125.) Effect of Changes in Protein Intake under Energy Restricted Conditions on Fattening Performance and Various Organ Weights in Lambs

126.) Effect of Sinusoidal Distribution of the Temperature on Laminar Natural Convection in Wavy Rectangular Enclosures

127.) Dielectric and Piezoelectric Behaviour of Spray Dried Pb_1-3x/2 Sm_x (Zr _0.53Ti_0.47) O₃ Ceramic System

128.) A Comprehensive Survey on the Present Status of Hospital Waste Management in Iran: A Case Study of Rasht

129.) Time Series Seasonality: Tourism in Mali

130.) Application of Medium Pressure UV Lamp for Wastewater Disinfection of Milk Production Industry

131.) Nitrate Leaching Through Unsaturated Soil Columns: Comparison Between Numerical and Analytical Solutions

132.) Modeling and Optimization of High-technology Manufacturing Productivity Based on Support Vector Machines and Chaos

133.) An Algebraically Derived Minimal Cost Solution Technique of the EOQ Model Under Conditional Trade Credit

134.) The EPQ Model with Shortages and Variable Lead Time

135.) Analysis on Characteristics of Three Dairy Cooperatives Sampled in East Java

136.) The Physical and Mechanical Properties of Heavyweight Concretes Used in Radiation Shielding

137.) Aerodynamic Performance of Off-design Highly Laded Blade: A Case Study

138.) Sequential and Parallel Genetic Algorithms for the Hybrid Flow Shop Scheduling Problem

139.) Capabilities of Cermets Tools for High Speed Machining of Austenitic Stainless Steel

140.) A Logistic Regression Analysis of the Ischemic Heart Disease Risk

141.) Fiber Simulation Based Analysis of Erbium Doped Amplifier

142.) Fast Template-based Face Detection Algorithm Using Quad-tree Template

143.) Supermarkets in the Food Supply Systems in Southern African Development Community: A Case Study of Zambia

144.) Characterization of MEMS Automotive Sensor for Tire Pressure Monitoring System

145.) Market Reforms, Spatial Price Spread and Market Connectedness: Evidence from Wheat Markets in Pakistan

146.) Topological Information Based Reliable Routing Scheme for Ad Hoc Networks

147.) Determinants of Technical Efficiency of Wheat Farming in Southeastern Anatolia, Turkey: A Nonparametric Technical Efficiency Analysis

148.) Extraction and Chromatographic Determination of Caffeine Contents in Commercial Beverages

149.) Sensory Evaluation of Some Cooking Bananas in Ghana

150.) Are Informal Market Linkages in Developing Countries Transaction Cost Sensitive? Evidence from Procurement of Smallholders` Produce by Brokers in Kenya

151.) Constitutive Equations for an Elastic Media with Micro-voids

152.) Differential Expression of Aluminium Tolerance Mechanisms in Cowpea Genotypes under Phosphorus Limitation

153.) Private Charity and Cooperation Vs. Non-cooperation

154.) Environmental Pollution and Solution Recommendations of Konya City, Turkey

155.) Analysis and Enhancement of Authentication Algorithms in Mobile Networks

156.) Sodium Chromate and Diethylene Amine as Corrosion Inhibitors for Mild Steel in Cassava Fluid

157.) A Mathematical Model for Load Optimization: Linear Load Curves

158.) Driving Resistance Estimation Based on Unknown Input Observer

159.) Food Self Sufficiency: Maize Production in Southern Mali

160.) Potential of Laser Distance Sensors for Measuring Crop Parameters

161.) An Analysis of Import Demand in Vegetal Oil and Products Industry in Turkey

162.) Reducing Load Effects in High-energy, High-efficiency Inductive Links

163.) Design and Construction of a Pneumatic-thermal Machine for Controlling Colorado Potato Beetle (Leptinotarsa decemlineata)

164.) Application of Multi Criteria Method to Identify the Best-fit Statistical Distribution

165.) Application of Magneto-Rheological Damper for Car Suspension Control

166.) Cephalometric Indicies among Nigerians

167.) Elastic Constants and Thermal Properties of Lead-bismuth Borate Glasses

168.) Modeling and Simulation of Dynamic Systems

169.) Recovery of Zinc from Zinc Waste By-adsorption Process

170.) Building with Nature (Ecological Principles in Building Design)

171.) Performance of Electronic Pulsation Control Systems and Pulsation Control Problems for Milking Machines in Turkey

172.) Foreign Direct Investment in Africa- Mali Attracts Foreign Investment

173.) Determination of Pirimiphos-Methyl and Chlorpyrifos-Ethyl Residues on Tomato and Pepper Fruits Grown in Greenhouse

174.) Evaluation of Renewable Energy Sources and Sustainable Development Planning of Turkey

175.) In vitro Antimicrobial and in vivo Cytotoxic Activity of Some Ferrocene Derivative Bioactive Metal Complexes of First Transition Series

176.) LQ-moments: Application to the Extreme Value Type I Distribution

177.) Poling of Ferroelectric Ceramics

178.) A Point of Care Clinical Decision Support System for the Diagnosis of Neonatal Jaundice by Medical Field Personnel

179.) Replacing Limestone and Linseed Oil in the Synthesis of Putty

180.) Geochemical Assessment of Some Heavy Metal Levels in Neka River Sediments-Neka City, Iran

181.) Chemical Analyses with X-ray Diffraction, X-ray Fluorescence and the Influence of the Impurities on the Quality of Kaolin of Tamazert El-Milia, Algeria

182.) Study and Measurement of Some Persistent Organochlorine Residues in Sediments from the Two Great Rivers (Tajan and Neka) of Mazandaran Province (Iran)

183.) Technology for Preparing and Thermal Treatment of High Strength Concretes

184.) Consumption Forecasting of Iran Plywood Industry with Respect to its Substitution Rate in Building Applications

185.) DA Facile Route for Synthesis of Aluminum Borate Nanowires

186.) Assesment of the Local Government`s Efforts in Challenging to Environmental Problems Using Factor Analysis: A Case Study of Turkey

187.) A New Hybrid Analytical Analysis of the Magnetohydrodynamic Flow over a Rotating Disk under a Uniform Suction

188.) A Two-Layer Dictionary Organization for Quickly Retrieval

189.) Measurement of Some Heavy Metals in Sediments from Two Great Rivers (Tajan and Neka) of Iran

190.) Transient Analysis of FACTS and Custom Power Devices Using Phasor Dynamics

191.) Algebraic Improvement on Effects of Random Defective Rate and Imperfect Rework Process on Economic Production Quantity Model

192.) A General Projection Gradient Method for Linear Constrained Optimization with Superlinear Convergence

193.) How Twist and Twist Directions Influences the Sewing Thread Spinability

194.) Job Satisfaction among Educators in Colleges of Education in Southern Nigeria

195.) Spectral Detection of the Defect of Short Circuit in a Permanent Magnets Synchronous Machine

196.) Performance Evaluation of Voltage Stability Indices for Dynamic Voltage Collapse Prediction

197.) Representation and Storage of Colours Images in Databases using a Rtree Generic Structure

198.) Stabilization of Waste Pet Bottles with Gypsum

199.) Sugar and Sugar Beet Policy Reforms in Turkey

200.) Influence of Inulin Addition on Physical Properties and Sensory of `Dadih`

201.) Evaluation on the Effect of Topping Frequency on Yield of Two Contrasting Sweet Potato (Ipomoea batatas L.) Genotypes

202.) A Framework for Encrypting the Huffman Algorithm

203.) Effects of Different Amino-acid Derivatives on the Inhibition of NST-44 Mild Steel Corrosion in Lime Fluid

204.) Determining Wheat Crop Insurance Premium Based on Area Yield Insurance Scheme in Konya Province, Turkey

205.) Arsenic Removal by Dissolved Air Flotation

206.) Rethinking the Approaches to Women Empowerment: Bangladesh Perspective

207.) The Effects of Fertigation Management in the Different Type of In-line Emitters on Trickle Irrigation System Performance

208.) Equivalent Scale on Food Consumption in Turkey

209.) A Research Towards Meeting the Electricity Demand of a Plant via Wind Turbine

210.) A Practical Implementation of the Process Capability Indices

211.) Applications of Process Capability and Process Performance Indices

212.) A Study of Moving Hydruaulic Jump in Rectangular Channels

213.) Soil Stabilization of Forest Roads Sub-base Using Lime Mud Waste from the Chemical Recovery Process in Alkaline Pulp Mill

214.) The Effects of Free Trade Agreement on Intra-Industry Trade (A Case Study of Textile Sector in Turkey)

215.) A Linear Regression Model to Study the Relationship of Pesticide Imports with Agricultural Productivity Growth in Pakistan

216.) Effect of Human Activities and Oil Pollution on the Microbiological and Physicochemical Quality of Udu River, Warri, Nigeria

217.) Effect of Ecotype on Semen Characteristics of Sahel Goats in Borno State

218.) Geochemical Analyses of Potential Source Rocks and Light Oils in Pan Yu Low Uplift and Bai Yun Depression, Pearl River Mouth Basin, South China Sea

219.) Image Processing for Synthesizing Lung Nodules: A Experimental Study

220.) Determination of Hydro-chemical Parameters of Salt Transportation in Soil by Using the Solution of Convective Diffusion Equation

221.) Finite State Machine Detection Model Based on Adaptive TTL Neuron

222.) An Axisymmetric Hyperelastic Solid Model for Forming Processes of Hollow Plastic Bodies

223.) An Analytical Approach on Non-parametric Estimation of Cure Rate Based on Uncensored Data

224.) Transferring the Eigenvector Obtained by the Method of Analytic Hierarchy Process to Maps

225.) How Does Arsenic Contamination of Groundwater Causes Severity and Health Hazard in Bangladesh

226.) Ionic Conduction Model in Salted Chitosan Membranes Plasticized with Fatty Acid

227.) Optical and Electrical Properties of Borate Glasses in the System: B₂O₃/Na₂O/TiO₂

228.) The Effect of PVP Addition and Heat-treatment Duration on Zinc Oxide Nanoparticles

229.) Solar Drying as an Option for Shrimp Processing Biowaste in Khulna District-Southwest Bangladesh

230.) Alternative Processing Option from Shrimp Processing Biowaste in Khulna District-Southwestern Bangladesh

231.) Implementation of Matched Load in a Transmission Line by Using FDTD Method

232.) Structural Analysis of Animal Husbandry and Fishery in Turkey: An Input-output Analysis

233.) Use of Sunflower Stalk and Pumice in Gypsum Composites to Improve Thermal Properties

234.) Modeling and Simulation of Thermal Transfer in Batch Reactor

235.) The Effects of Population Growth in Nigeria

236.) Corrosion of Low Carbon Steel Influenced by the Presence of Iron-oxidizing Bacteria (Leptothrix discophora)

237.) Use of a Nonlinear Controller to Improve One-cycle Controller Response

238.) Boundary Mapping of Chromosome Spread Images Using Optimal Set of Parameter Values in Discrete Cosine Transform Based Gradient Vector Flow Active Contours

239.) Hardware Implementations of GF (2^m) Arithmetic Using Normal Basis

240.) Some Physical and Mechanical Properties of Sainfoin (Onobrychis sativa Lam.), Grasspea (Lathyrus sativus L.) and Bitter Vetch (Vicia ervilia (L.) Willd.) Seeds

241.) Fabricating and Tensile Characteristics of Recycled Composite Materials

242.) Carbon Monoxide Monitoring at Stationary and Mobile Stations

243.) Detection of the Antitumor Glutaminase-Asparaginase in the Filamentous Fungi

244.) Performance Evaluation of Various Techniques for Handling Interrupts in Gigabit Networking Environment

245.) Thermal Performance in Building Without Shading Devices

246.) Biodegradability Improvement of Industrial Wastewater Using Hyacinth

247.) Land Registration and Cadastre in Turkey from the Ottomans to Date

248.) Laminar Natural Convection in a Vertical Channel with a Sinusoidal Obstruction

249.) Effect of Ailanthus altissima and Zizyphus spina-christi on Bilharzial Infestation in Mice: Histological and Histopathological Studies

250.) Effect of Citrus reticulata on Serum Protein Fractions of Mice After Schistosoma mansoni Infection

251.) Physico-chemical and Trace Metal Characterization of Battery Factory Wastewater

252.) Vibration Analysis of Rectangular Plates with Mixed Boundary Conditions and Sprung Masses using the Differential Quadrature Method

253.) Banking Service Loyalty Determination Through SEM Technique

254.) Leaching Requirements to Prevent Soil Salinization

255.) Can Risk-aversion Towards Fertilizer Explain Part of the Non-adoption Puzzle for Hybrid Maize? Empirical Evidence from Malawi

256.) Estimation of Consumption Emissions of Lead and Cadmium from Dry Cell Battery Importation in Nigeria: 1980-1998

257.) Domestic Waste Disposal Practice of Sylhet City

258.) Application Design for Modularity Approach to Enhance Platform Architecture

259.) Determination of Initial Unconditional Solution of Heat Conductivity Equation for Evaluation of Temperature Variance in Finite Soil Layer

260.) Principle of Rotor Design for Horizontal Axis Wind Turbines

261.) Resolution of Scheduling Problem of the Production Systems by Sequential and Parallel Tabu Search

262.) Differentiation of Bacillus thuringiensis and Escherichia coli by the Randomly Amplified Polymorphic DNA Analysis

263.) Prediction of Airport Flexible Pavement Critical Responses from Non-destructive Test Data Using ANN-based Structural Models

264.) Preparation of TiO₂ Photocatalyst Using TiCl₄ as a Precursor and its Photocatalytic Performance

265.) Lightweight Aerated Concrete Incorporating Various Percentages of Slag and PFA

266.) Plasma Sterilization Using the High Voltage Pulsed Discharge at Atmospheric Pressure

267.) An Improved Quasi-Static Scheduling Algorithm for Mixed Data-Control Embedded Software

268.) Gas Chromatography and Gas Chromatography-mass Spectrometry Analysis of Indonesian Croton tiglium Seeds

269.) Solving Information Fusion Problems on Unreliable Evidential Sources with Generalized DSmT

270.) Application of Genetic Algorithms and Rules in the Scheduling of Flexible Job Shops

271.) Vibration Analysis of Annular Plates Using the Modified Generalized Differential Quadrature Method

272.) Development of a Permeability Model for Palm Fruit Cake

273.) The Identification of Core Periodicals by Fuzzy Order-optimum Theory

274.) Lyapunov Exponents Estimation of the Impact Oscillation Using Observed Time Series

275.) The Effect of Several Parameters on Radial Basis Function Networks for Time Series Prediction

276.) The Developments in The World Hazelnut Production and Export, The Role of Turkey

277.) Investigation on Radon Concentration in the Tehran Subway Stations, in Regard with Environmental Effects

278.) Screening of Cowpeas for Resistance to the Flower Bud Thrips, Megalurothrips sjostedti Trybom (Thysanoptera: Thripidae)

279.) Electrochemical Behavior and the Determination of Omeprazole Using Glassy Carbon Electrode

280.) Technical Note-An Integrated Single-vendor Single-buyer Inventory System with Shortage Derived Algebraically

281.) Monte Carlo Modeling for Gamma Rays Bursts Detection Monitoring Algorithms

282.) Investigation of Microstructure and Impact Toughness of Semisolid Hypereutectic High Chromium Cast Iron Prepared by Slope Cooling Body Method

283.) Land Use Potential and Suitability for Areas of Arable and Garden Farming, Meadow-Pasture and Recreation-Tourism in Alpagut Village, Bolu, Turkey

284.) Contamination of Ground Water in Heavy Metals Concentration of Tabriz Industrial Zone

285.) Isolation and Identification of Active Antioxidant Compound from Star Fruit (Averrhoa carambola) Mistletoe (Dendrophthoe pentandra (L.) Miq.) Ethanol Extract

286.) Impact of Surrounding Illumination on Visual Fatigue and Eyestrain While Viewing Television

287.) The Role of CeO₂ in the High Electric Field ZnO Varistors

288.) Real-Time Algorithms for Video Summarization

289.) Differences in the Liming Potential of Some Fertilizer Materials in a Tropical Acid Alfisol

290.) Variations in Nuclear Data and its Impact on INAA

291.) Stability and Demulsification of Water-in-Crude Oil (w/o) Emulsions Via Microwave Heating

292.) Wave Modelling Through Layered Media Using the BEM

293.) Formal Specification and Validation of Selective Acknowledgement Protocol using Z/EVES Theorem Prover

294.) Action of Subgroups of G = <x,y; x² = y⁴ = 1> on

295.) Comparative Study Between Carnosine and Fluvastatin in Hypercholesterolemic Rabbits

296.) Rice Farmers` Returns in Selected Area in Jessore District of Bangladesh

297.) Termination Analysis Approach and Implementation

298.) Polyhydroxyalkanoates Production by Recombinant Escherichia coli Harboring the Structural Genes of the Polyhydroxyalkanoate Synthases of Ralstonia eutropha and Pseudomonas aeruginosa Using Low Cost Substrate

299.) The Inhibition Characteristics of Brine on the Corrosion Susceptibility of Al-Zn Alloy Systems

300.) The Effect of Triton X-100 on Biodegradation of Aliphatic and Aromatic Fractions of Crude Oil in Soil

301.) Effect of Degree of Deformation on the Mechanical Properties of High Temperature Thermomechanically Treated Steel

302.) WCDMA Forward Link Capacity Improvement by Using Adaptive Antenna with Genetic Algorithm Assisted MDPC Beamforming Technique

303.) Lightning Electromagnetic Fields Modeling Using an Indirect Hybrid Method- Interaction with an Overhead Power Line

304.) Artificial Neural Networks Approach to the Modelling of AC Arcs Maintenance Conditions on Ice-covered Insulators

305.) Statistically-Oriented Iterative Algorithm for Improved Approximation by Modified Baskakov Operator

306.) Statistically Improved Approximation By Modified Lupas Operator

307.) Identification of Surimi Gel Strength Classes using Backpropagation Neural Network and Principal Component Analysis

308.) Lignin Graft Copolymer as a Drilling Mud Thinner for High Temperature Well

309.) Labeled Burst Switching

310.) The Transformations of Random Variables Under Symmetry

311.) Treatment of Water with Granular Ceramics and Alumina Through a Fluidization System

312.) Preparation and Optical Characterization of Chemical Bath Deposited CdCoS₂ Thin Films

313.) Residues and Decay of Some Insecticides in Different Types of Water

314.) Takagi-Sugeno Based Controller for Mobile Robot Navigation

315.) Discrimination and Classification Levels of Students as Per their Major Specialization

316.) Approximation of Fixed Points of Certain Linear Pseudocontractive Map by a Stochastic Iterative Method

317.) Industrial Brewery Modelling by Using Artificial Neural Network

318.) SWOT Analysis of Fishery Sector in Turkey

319.) A Continuous Microwave Heating of Water-in-Oil Emulsions: An Experimental Study

320.) Understanding the Effects of Historic Land Use Pattern on an Urbanized Stream Corridor

321.) Engineering Properties of Cob as a Building Material

322.) Process for Separating Heavy Metals from Industrial Residues by Using an Ultrasound Flotation and Eucalyptus as Sequestering Agent

323.) Effects of High Power Electronics Converters on PLC Signals

324.) Impacts of Rural Development Projects on Rural Areas in Turkey: A Study on Yozgat Rural Development Project

325.) Chemical Composition and Physicochemical Characteristics of Two Varieties of Bambara Groundnut (Vigna subterrenea) Flours

326.) A Logistic Regression Analysis of the Contractor`s Awareness Regarding Waste Management

327.) Linear Programming Application to Utilization of Duckweed (Lemna paucicostata) in Least-cost Ration Formulation for Broiler Finisher

328.) A Developed Mathematical Computerized Approach for Designing Cellular Manufacturing Systems

329.) Cofiring of Coal and Biomass in a Travelling Grate Boiler in India

330.) Time Series Analysis for Hydrological Features: Applications of Box-Jenkins Models to Euphrates River

331.) Does the Incomplete Information Matter with Export Quotas?

332.) Phenylpropanoid and Isopropanoid Enhance Tolerance to Increased Levels of UV_A+B Radiation in Three Cultivars of Soybean (Glycine max) Seedlings

333.) Grafting of Silk Fibre with MMA, EMA and MAN for Improved Properties

334.) Spatio-temporal Simulation of a Microjunction

335.) Efficient Estimation of Normal Population Mean

336.) Heterogeneous Fleet Vehicle Routing Problem with Time Windows and Nonlinearly Penalized Delays

337.) Metals Contamination in Edible Carnivorous Fishes of Arabian Sea

338.) A Novel Low Power and High Performance 14 Transistor CMOS Full Adder Cell

339.) Adsorption Density and Spectra Distribution of Adsorbed Lysozyme as a Function of pH and Temperature

340.) Study on the Factors Influencing the Consumption of Safe Vegetables in Hochiminh City, Vietnam

341.) A Simulation Model of Solid-state Transfer Switch for Protection in Distribution Systems

342.) The Elitist Non-dominated Sorting GA for Multi-objective Optimization of Standalone Hybrid Wind/PV Power Systems

343.) Deinkability Efficiency of Waste Office Paper Printed Using a Duplicating Machine

344.) Information Fusion Technology with Application to the Localization of Pipeline Leakage Based on Negative Pressure Wave Detection

345.) Blood Lead Levels of People Living in Traffic Areas in Benin City, Nigeria

346.) Neuro-Fuzzy Methods for Fault Diagnosis of Nonlinear Systems

347.) The Effect of Vacuum Cooling of Some Products on the Ratio of Weight Loss

348.) A New Multilevel CPU Scheduling Algorithm

349.) The Allelopathic Effect of Pictacia Leaf Extracts and Pure Essential Oil Components on Pelargonium Ringo Deep Scarlet F1 Hybrid Seed Germination

350.) Rice Farmers` Marketing Efficiency in Southwestern Part of Bangladesh

351.) Assessment of Exposures to Bioaerosols among Poultry Feed Plant Workers

352.) Minimization of Harmonics in PWM Inverters Based on Genetic Algorithms

353.) Study on Demulsification of Water-in-Oil Emulsions Via Microwave Heating Technology

354.) Trace and Rare Earth Elements Geochemistry of Oshosun Sediments of Dahomey Basin, Southwestern Nigeria

355.) Effect of Calcium Competition on Chromium Adsorption by Fungi Biomass

356.) Money Supply and Inflation Relationship in the Turkish Economy

357.) Fracture Mechanics Modelling of Cracked Aluminium Panel Repaired with Bonded Composite Circular Patch

358.) Feasibility Study of Separating Fischer-Tropsch Wax from Catalyst Using Supercritical Fluid Extraction

359.) Suggestion of Appropriate Equations of State for Density/Viscosity Estimation in Wax/Catalyst Separation Using Near-Critical Hexane

360.) Soil Pollution by Heavy Metals and Remediation (Mazandaran-Iran)

361.) Fuzzy Set Methodology For Evaluating Alternatives To Compare Between Different Power Production Systems

362.) Occurrence of Harmonics with Induction Machine and Switched Reluctance Machine: A Survey and Analysis

363.) B2B E-commerce in the United States, Europe and Japan: A Comparative Study

364.) Techniques for Reproductive Efficiency with Reference to Oestrus Detection and Timing of Insemination in Cattle

365.) Order Statistics from Pareto Distribution

366.) Maturity Modeling in Bai Yun Depression and Pan Yu Low Uplift, South China Sea

367.) Specification of the Multimedia Documents Scenari by the Petri Networks and the Timed Automata

368.) Assessment of Multi-band Capabilities in the Detection of Built-up Areas in Northwestern Nigeria

369.) Methodology for Road Network Extraction in Satellite Images

370.) A Comparative Study of Household Groundwater Arsenic Removal Technologies and their Water Quality Parameters

371.) Design, Development and Performance Optimization of a New Artificial Intelligent Controlled Multiple-beam Optical Scanning Module

372.) Tuning Semiconductor Laser Diode Lasing Frequency and Narrowing the Laser Linewidth Using External Oscillating Driving Field

373.) Nitrogen Release Patterns of Mixed Gliricidia sepium and Acacia auriculiformis Leaves as Influenced by Polyphenol, Lignin and Nitrogen Contents

374.) Factors Affecting the Adoption of E-commerce: A Study in Nigeria

375.) Monitoring of Madaba City Growth by RS and GIS Technique

376.) Revegetation Condition and Morphological Characteristics of Grass Species Observed in Landslide Scars, Shintategawa Watershed, Fukuoka, Japan

377.) Wheel Attitude Cancellation Thruster Torque of LEO Microsatellite during Orbital Maintenance

378.) Free Radical Scavenging Activity of Mussaenda glabra

379.) Studies on the Inorganic Chemicals and Microbial Contaminants of Health Importance in Groundwater Resources in Port Harcourt Rivers State Nigeria

380.) Gymnemic Acid Production in Suspension Cell Cultures of Gymnema sylvestre

381.) A Septic Tank System: On Site Disposal

382.) Identification and Trajectory Control of a Manipulator Arm Using a Neuro-Fuzzy Technique

383.) Uniformity of Within-Row Distance in Precision Seeders: Laboratory Experiment

384.) The Influence of Process Parameters on Lactic Acid Fermentation in Laboratory Scale Fermenter

385.) The Optimal Method of Nonlinear Decoding for Nonlinear Encoding of QAM Signal

386.) Fama-French`s CAPM: An Empirical Investigation on DSE

387.) Extraction and Characterization of Oil Degrading Bacteria

388.) A Comparative Study on Emulsion Demulsification by Microwave Radiation and Conventional Heating

389.) α-Glucosidase Inhibitory Activity and Hypoglycemic Effect of Phaleria macrocarpa Fruit Pericarp Extracts by Oral Administration to Rats

390.) Relationship of Surface Roughness with Current and Voltage During Wire EDM

391.) Chemical Characterization of Selected Tree Legumes as Indices for Their Litter Quality

392.) Characteristics of Nonlinear Tm Surface Waves in an Interface of Antiferromagnet and Left-handed Metamaterial Structure

393.) Semen Characteristics of the Brown Ecotype of Sahel Goats in the Semi-arid Zone of Nigeria

394.) Study of the Purifying Capacity of the Coconut Carbon from Fibrous Mesocarpe

395.) The P-version Finite Element Method Using Bezier-Bernstein Functions for Frames, Shells and Solids

396.) Homotopy Analysis of Slider Bearing Lubricated With Powell-Eyring Fluid

397.) Adsorption Isotherms of Pb (II), Ni (II) and Cd (II) Ions onto PES

398.) Service Quality Measurement in Indian Retail Banking Sector: CA Approach

399.) Optimization of Water Consumption in Industrial Systems Using Linear and Nonlinear Programming

400.) Effect of Cathodic Adsorbed Hydrogen on Industrial Aluminium Alloy AA 5083 Corrosion Induced by Elemental Mercury in LNG Industries

401.) Factors Affecting Aflatoxin Contamination of Harvested Maize in the Three Agroecological Zones of Uganda

402.) The Effect of Soil Tillage Systems on Wheat Growth and Yield in the Dry-Land Region of Turkey

403.) Impact of Mechanized Harvesting Machines on Forest Ecosystem: Residual Stand Damage

404.) Magnetohydrodynamic Flow of Viscous Fluid Between Two Parallel Porous Plates

405.) Two New Holothurian Sclerite Genera from the Late Cretaceous of Jordan

406.) Factors that Influence Adsorption using 2^k Factorial Experiments

407.) Development of Computer Controlled FES System with Improved Circuit Design

408.) A New Model for Coupled Rock-coal Deformation and Gas Leak Flow in Mining Engineering

409.) Physical and Mechanical Characterization of Technical Esparto (Alfa) Fibres

410.) A Comparative and Correlational Study of the Body-Image in Active and Inactive Adults and with Body Composition and Somatotype

411.) A New Method to Resolve the Matching Problem Without Using a Calibration of Camera

412.) Evaluation of Insecticidal Potentialities of Aqueous Extracts from Calotropis procera Ait. Against Henosepilachna elaterii Rossi

413.) Palm Nut Cracking under Repeated Impact Load

414.) The Effects of Composted Poultry Wastes on Nitrogen Mineralization and Biological Activity in a Silt Loam Soil

415.) Preliminary Investigation on the Phytochemistry and Antimicrobial Activity of Senna alata L. Leaves

416.) Thermodynamic of Chromium Sorption on Biomass Fungi from Aqueous Solution

417.) Electrochemical Study of Aluminium Alloy AA 5083 Corrosion Induced by Elemental Mercury in LNG Industries

418.) Impact of Research Findings on the Agronomic, Sociocultural and Economic Base of Small Holder Rubber Farmers-A Case Study of Two Farm Settlements in Southern Nigeria

419.) AVHRR Data Sensor Processing

420.) A Strong Convergent Stochastic Algorithm for the Global Solution of Autonomous Linear Equation in n-spaces

421.) Characterization of Isopropanol Extracted Vegetable Oils

422.) Enhancement of Heat Dissipation for High Brightness Light Emitting Diodes

423.) Peat Moisture and Water Level Relationship in a Tropical Peat Swamp Forest

424.) Chemical Composition and Antibacterial Activity of Steam Distilled Oil of Ashanti Pepper (Piper guineense) Fruits (Berries)

425.) Impact of Mobile-Commerce: Benefits, Technological and Strategic Issues and Implementation

426.) An Assessment over Alternative Monetary Policy Strategies

427.) Effect of Curvature Ratio on Cooperating Double-Diffusive Convection in Vertical Annular Cavities

428.) Modeling of Cd²⁺ Sorption Kinetics from Aqueous Solutions onto Some Thiolated Agricultural Waste Adsorbents

429.) Annual and Seasonal Trends of Sulphide Content of Tidal Flat Mud in the Ariake Sea, Japan

430.) Spatio-Temporal Assessment of Historical Droughts using SPI with GIS in GAP Region, Turkey

431.) Alunite Associated with Kaolin Beds, South Jordan

432.) Evaluation of Transformer Magnetizing Core Loss

433.) Determination of Maintainability Index Based on Assembly Criteria

434.) Lignin Graft Copolymer as Mud Thinner for Deep Well Drilling Operation

435.) Application of the Experimental Designs on the Modeling of the Combustion`s Parameters

436.) Improving the Physical and Thermal Properties of the Fire Clay Refractory Bricks Produced from Bauxite

437.) Financial Market Integration in Asia: Empirical Analysis on Selected Asian Stock Index Futures Markets

438.) Laminar Natural Convection in Saltbox Roofs for Both Summerlike and Winterlike Boundary Conditions

439.) An Optimal Backstepping Design for Blended Aero and Reaction-Jet Missile Autopilot

440.) In vitro Inhibition of Mastitis Pathogens by Bacteriocin RN 86 Produced by an Indigenous Lactobacillus casei Isolate

441.) Testing Research on the Effect of Effective Stress on Coal Specimen

442.) Time Storage Effect of the Resin on the Toughness of a Unidirectional Carbon Fibre

443.) Testing Research on the Coal Specimen Permeability

444.) Simple Method for Outdoor LOS Propagation Model Using Ray Tracing Tools

445.) The Best Method of Guelph Analyses for Measuring Loamy Soils Saturated Hydraulic Conductivity

446.) A Positive Linear Operator Using Probabilistic Approach

447.) Release of the Phthalate Esters into Water Stored in Plastic Tumblers

448.) Influence of Market Location, Sex and Species on Weight and Prices of Sheep and Goats Around Jos Plateau State

449.) A Photovoltaic Uninterruptible Power Supply System Synchronised to the Grid

450.) Effect of Scale Parameters in the Performance of Shewhart Control Chart with Interpretation Rules

451.) Effect of Heating on the Functional Properties of Whey Proteins Concentrate in a Model System

452.) Effect on Limestone of 15 Cycles of Immersion in Dead Sea Water

453.) On the Solution of Linear Complementarity Problem by A Stochastic Iteration Method

454.) The Distribution of Polycyclic Aromatic Hydrocarbons in the Wetland Soil Irrigated by Pulp Waste Water

455.) Assessment of Rainwater Run-off Due to the Proposed Regional Plan for Gaza Governorates

456.) Arsenic and Antimony in Drinking Water in Khohsorkh Area, Northeast Iran Possible Risks for the Public Health

457.) Risk Assessment in Pharmaceutical Industry by Using Relative Stress Index (RSI)

458.) Construction Project Control in Virtual Reality: A Case Study

459.) CFD Simulations of the 3D Velocity Profile of Paddle Agitator and Two-blade Impeller in Stirred Vessel with a Highly Viscous Newtonian Fluid

460.) Efficient Load Flow Method for Radial Distribution Feeders

461.) Developing a Public Open Space Network: A Case Study in Ortaca District (Mugla, Turkey)

462.) An Assessment of Regulatory Framework for Monitoring of Pesticides in Sindh Province of Pakistan

463.) Kinetics and Thermodynamic Study of Lead Adsorption from Aqueous Solution onto Rubber (Hevea brasiliensis) Leaf Powder

464.) Optimization in Implant Topology to Reduce Stress Shielding Problem

465.) The Carrying Capacity and Suitability of the Menzelet Reservoir (Kahramanmaras-Turkey) for Trout Culture in Terms of Water Quality

466.) Neuraminidase (Sialidase) Activity and its Role in Development of Anaemia in Trypanosoma evansi Infection

467.) Aerobic Oxidation of D-Glucose by Methylene Green in Alkaline Aqueous Solution by Visible Spectrophotometry

468.) Heavy Metals Removal in Aqueous Solution by Activated Carbons Prepared from Coconut Shell and Seed Shell of the Palm Tree

469.) Role of Biological Control on Some Physiological Aspects of Zea mays Infected by Rhizoctonia solani

470.) Development of Hybrid Bridges: State of Arts and Conceptual Design

471.) Survival Probability of Sickle Cell Patients with Respect to HbF Levels

472.) Voltage Stability Evaluation by Using Maximum Power Transfer Phasor Diagram

473.) The Fixed Points of Certain Discontinuous Operators on Locally Convex Spaces

474.) Three Phase Induction Motor Faults Detection by Using Radial Basis Function Neural Network

475.) Variation in Morphological Properties and Particle Size Distribution of Alfisols, Inceptisols and Entisols in the Gubi Soil Series, Bauchi, Nigeria

476.) Inherent Fertility Status of Alfisols, Incepfisols and Entisols in the Gubi Soil Series, Bauchi, Bauchi State, Nigeria

477.) Optimizations of Conditions for Maximum Recovery of Astragalin from Thesium chinense Turcz

478.) Valorization of the Sand of Dune of the Western Erg (Algeria) in the Formulation of the UHPC

479.) Assessment of Rural Tourism in Turkey Using SWOT Analysis

480.) Replacing Cattle Manure Ash as Cement into Concrete

481.) Evaluation of Productivity Potentials of Soils of the Gubi Soil Series

482.) Appropriate Fermentation Process for Tapioca`s Wastewater in Indonesia

483.) Olive Existence in Akhisar District in Manisa Province in Turkey

484.) Relationship Among Yield Components and Selection Criteria for Yield Improvement in Safflower Carthamus tinctorious L.

485.) Travelling Wave Solutions for the Generalized Special Type of the Dodd-Bullough-Mikhailov Equation

486.) Influence of Aspect Ratio on Natural Convection in a Partially Porous Enclosure

487.) Effect of Cone Angle and Revolution Speed of Disc on Fertilizer Distribution Uniformity in Single-Disc Rotary Fertilizer Spreaders

488.) Evaluation of Different Trout Farming Systems and Some Policy Issues in the Black Sea Region, Turkey

489.) Artificial Cryptorchidism and the Moderating Effect of Melatonin (N-acetyl. 5 methoxy tryptamin) in Sprague-Dawley Rats

490.) Stability Investigation of Water-in-Crude Oil Emulsion

491.) Effect of Radiation on the Flow of a Visco-Elastic Fluid and Heat Transfer in a Porous Medium over a Stretching Sheet

492.) Evaluation of Human Exposure to Lead and Cadmium from Some Local Nigerian Medicinal Preparations

493.) Using of Composite Material in Wind Turbine Blades

494.) Influence of Operating Variables on Soda Pulping of Musa paradisiaca Mid-Rib

495.) Design of Tools for Stamping in Reactive Powder Concrete for Thin Sheets

496.) Comparison of the One-Dimensional and Two-Dimensional Arterial Models

497.) A Novel Low Power 8 Bit Adder Unit with Adaptive Supply Voltage

498.) Growth and Photoluminescence of Single Crystal ZnS Nanowires

499.) Study on Grape Seeds Extraction and Optimization: An Approach

500.) Synthesis of ZnS Nanobelts with Multi Photoluminescence Peaks

501.) LDV Measurements in a Perturbed Turbulent Boundary Layer

502.) Properties of Recycled Aggregate Concrete with Silica Fume

503.) Toxicity of Sumithion in Albino Rats: Hematological and Biochemical Studies

504.) Knowledge-Based Power System Protection Design Courseware

505.) A 16-electrode Fully Integrated and Versatile CMOS Microstimulator Dedicated to Cochlear Implant

506.) Biochemical Studies on the Hepatoprotective Effect of Curcuma longa on Some Glycolytic Enzymes in Mice

507.) Ecology of Freshwater Snails in Opa Reservoir and Research Farm Ponds at Obafemi Awolowo University Ile-Ife, Nigeria

508.) Comparative Leaf Anatomy of Ficus Linn. Species (Moraceae) from Nigeria

509.) The Effects of Fertigation Managements on Clogging of In-line Emitters

510.) Modeling of SO₂ Emission from Point Sources in Manali Region of Madras, India

511.) An Analytical Study for the Agricultural Manpower in Egypt

512.) Policies and Transition Problems of Agriculture in Turkey

513.) Optimal Lot-Sizing Policy under Two Warehouses and Two-Level Delay Permitted Using Algebraic Method

514.) KPIM of Gas/Condensate Productivity: Prediction of Condensate/Gas Ratio Using Reservoir Volumetric Balance

515.) The Anisofrequency Parameter Calculation in the Regions of Langmuir Probe Operation-Application to Argon Plasma

516.) Determinants of Training Needs of Fadama Farmers in Osun State of Nigerian and Implications for Extension Workers

517.) Assessment of the Training Needs of Fadama Farmers for Future Agricultural Extension Work Development in Osun State, Nigeria

518.) Crystallographic Structure and Electron Density of Ba_1-xPb_xTiO₃ Ceramic

519.) Earing Characteristics of Cold-Rolled and Temper Annealed Aluminium 1200

520.) Wild Tropical Forest Soil Characteristics and Composition of Directly Extractable Soil Lipid Fraction

521.) Limit of Through-tubing Rotary Drilling (TTRD) Well Completion

522.) A Prefetching Algorithm for Improving Web Cache Performance

523.) Thermal Behaviour of Building Wall Elements

524.) Sources and Consequences of Environmental Pollution and Institution`s Role, in Pakistan

525.) Effect of the Aluminium Fraction'x' in Subminiband Structures of Fibonacci Al_xGa_1-xAs/GaAs Superlattices

526.) Effect of Aging Temperatures on Impact Toughness of Precipitation Hardening Stainless Steel FV520 (B)

527.) XRD and Surface Morphology Studies on Chitosan-Based Film Electrolytes

528.) Numerical Modelling COD, N and P Removal in a Full-scale WWTP of China

529.) A Generalisation of Gregus Fixed Point Theorem

530.) Dynamically Changing Priorities Algorithm for CPU Scheduling

531.) Fatty Acids and Unsaponifiable Composition of Cucumis amaris Seeds Oil

532.) Supply Management Options for Tea Producing Countries: A Case Study on Indonesian Tea Product and its Competitors